Reference articles on history, science, culture and more
Surprise meSurprise meSubscribe
Encyclopedia

Smith predictor

Type of predictive controller

Wikipedia contributorsAdapted for Fathomly · View authors
1 min read
Source updated March 19, 2025
Image credit is listed at the end of this article.

The Smith predictor (invented by O. J. M. Smith in 1957) is a type of predictive controller designed to control systems with a significant feedback time delay. The idea can be illustrated as follows.

Suppose the plant consists of G(z) followed by a pure time delay z^{-k}. z refers to the Z-transform of the transfer function relating the inputs and outputs of the plant G.

As a first step, suppose we only consider G(z) (the plant without a delay) and design a controller C(z) with a closed-loop transfer function H(z)={\frac {C(z)G(z)}{1+C(z)G(z)}} that we consider satisfactory.

Next, our objective is to design a controller {\bar {C}}(z) for the plant G(z)z^{-k} so that the closed loop transfer function {\bar {H}}(z) equals H(z)z^{-k}.

Solving {\frac {{\bar {C}}Gz^{-k}}{1+{\bar {C}}Gz^{-k}}}=z^{-k}{\frac {CG}{1+CG}}, we obtain {\bar {C}}={\frac {C}{1+CG(1-z^{-k})}}. The controller is implemented as shown in the following figure, where G(z) has been changed to {\hat {G}}(z) to indicate that it is a model used by the controller.

Note that there are two feedback loops. The outer control loop feeds the output back to the input, as usual. However, this loop alone would not provide satisfactory control, because of the delay; this loop is feeding back outdated information. Intuitively, for the k sample intervals during which no fresh information is available, the system is controlled by the inner loop which contains a predictor of what the (unobservable) output of the plant G currently is.

To check that this works, a re-arrangement can be made as follows:

Here we can see that if the model used in the controller, {\hat {G}}(z)z^{-k}, matches the plant G(z)z^{-k} perfectly, then the outer and middle feedback loops cancel each other, and the controller generates the "correct" control action. In reality, however, it is impossible for the model to perfectly match the plant.

Watch videos about Smith predictorExplainers and documentaries on YouTube (opens in a new tab)

Sources and credits

This article is adapted from the Wikipedia article “Smith predictor”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.

Images, from Wikimedia Commons:

Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.

Continue exploring

Related topics

Feed forward (control)

A feed forward is an element or pathway within a control system that passes a controlling signal from a source in its external environment to a load elsewhere in its external environment. This is often a command signal from an external operator.

Minimum phase

In control theory and signal processing, a linear, time-invariant system is said to be minimum-phase if the system and its inverse are causal and stable. The most general causal LTI transfer function can be uniquely factored into a series of an all-pass and a minimum phase system.