Reference articles on history, science, culture and more
Surprise meSurprise meSubscribe
Encyclopedia

Salinometer

Device designed to measure the salinity of a solution

Wikipedia contributorsAdapted for Fathomly · View authors
1 min read
Source updated May 7, 2024
Image credit is listed at the end of this article.

A salinometer is a device designed to measure the salinity, or dissolved salt content, of a solution.

Since the salinity affects both the electrical conductivity and the specific gravity of a solution, a salinometer often consist of an ec meter or hydrometer and some means of converting those readings to a salinity reading. A salinometer may be calibrated in either micromhos, a unit of electrical conductivity, (usually 0-22) or else directly calibrated for salt in 'grains per gallon' (0-0.5). A typical reading on-board ship would be 2 micromhos or 0.05 grains per gallon. A reading of twice this may trigger a warning light or alarm.

01Applications

Fresh water generators (Evaporators) use salinometers on the distillate discharge in order to gauge the quality of the water. Water from the evaporator can be destined for potable water supplies, so salty water is not desirable for human consumption.

In some ships, extremely high quality distillate is required for use in water-tube boilers, where salt water would be disastrous. In these ships, a salinometer is also installed on the feed system where it would alert the engineer to any salt contamination. The salinometer may switch the evaporator's output from fresh-water to feed-water tanks automatically, depending on the water quality. The higher quality (lower salinity) is required for the boiler feedwater, not for drinking.

Watch videos about SalinometerExplainers and documentaries on YouTube (opens in a new tab)

Sources and credits

This article is adapted from the Wikipedia article “Salinometer”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.

Images, from Wikimedia Commons:

Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.

Continue exploring

Related topics

Total dissolved solids

Total dissolved solids is a measure of the dissolved combined content of all inorganic and organic substances present in a liquid in molecular, ionized, or micro-granular (colloidal sol) suspended form. TDS are often measured in parts per million (ppm).

Saline (medicine)

Saline is a mixture of sodium chloride (salt) and water. It has several uses in medicine including cleaning wounds, removal and storage of contact lenses, and help with dry eyes.

Mass concentration (chemistry)

In chemistry, the mass concentration ρi is defined as the mass of a constituent mi divided by the volume of the mixture V. ρ i = m i V {\displaystyle \rho _{i}={\frac {m_{i}}{V}}} For a pure chemical substance, the mass concentration equals its density (mass divided by volume); thus the mass concentration of a component in a mixture can be called the "density of a component in a mixture". This explains the usage of ρ (the lower case Greek letter rho), the symbol most often used for density.