Reference articles on history, science, culture and more
Surprise meSurprise meSubscribe
Encyclopedia

Rate-Adaptive Digital Subscriber Line

Digital subscriber line technology

Wikipedia contributorsAdapted for Fathomly · View authors
1 min read
Source updated September 6, 2025

Rate-adaptive digital subscriber line (RADSL) is a pre-standard asymmetric digital subscriber line (ADSL) solution. RADSL was introduced as proprietary technology by AT&T Paradyne, later GlobeSpan Technologies Inc., in June 1996. In September 1999, RADSL technology was formally described by ANSI in T1.TR.59-1999. RADSL supports downstream data rates of up to approximately 8 Mbit/s, upstream data rates up to approximately 1 Mbit/s, and can coexist with POTS voice on the same line.

RADSL allows rate-adaptation while the connection is in operation , rate-adaptation during connection setup is possible in many other DSL variants, including G.dmt and its successors. Rate-adaptation while the connection is in operation is specified as an option in ADSL2, ADSL2+, and VDSL2, under the name seamless rate adaptation (SRA).

01Technology

RADSL specifies two alternative modulation schemes, quadrature amplitude modulation (QAM) and carrierless amplitude phase modulation (CAP). RADSL is not interoperable with discrete multi-tone (DMT) modulation variants of ADSL, standardized in ANSI T1.413 Issue 2 and G.dmt (G.992.1). Upstream and downstream are frequency-division duplexed, the upstream and downstream transmit PSD masks are identical to those in ANSI T1.413.

In RADSL, the baud rate, center frequency, and constellation size of the downstream and upstream channels can be adjusted while the connection is in operation. Using this technique the line is more tolerant of errors caused by noise and signal loss. As the parameters are adjusted, the bandwidth may be markedly decreased if there is a large amount of line noise or signal degradation.

Watch videos about Rate-Adaptive Digital Subscriber LineExplainers and documentaries on YouTube (opens in a new tab)

Sources and credits

This article is adapted from the Wikipedia article “Rate-Adaptive Digital Subscriber Line”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.

Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.

Continue exploring

Related topics

Etherloop

Etherloop is a hybrid technology combining aspects of Ethernet with other technologies to achieve a result not possible with either technology alone. EtherLoop was originally developed in the 1990s to allow high-speed data communication access to residential customers over standard twisted-pair telephone lines, also known as plain old telephone service.

High-bit-rate digital subscriber line

High-bit-rate digital subscriber line is a telecommunications protocol standardized in 1994. It was the first digital subscriber line (DSL) technology to use a higher frequency spectrum over copper, twisted pair cables.

Multi-rate symmetric digital subscriber line

Multi-rate symmetric DSL is a proprietary, non-standardized symmetric digital subscriber line technology with a maximum distance of 29,000 feet (8,800 m). It is capable of multiple transfer rates, as set by the Internet service provider, typically based on the service and/or price.