Oxbow
U-shaped ox collar for pulling loads
An oxbow is a U-shaped metal pole (or larger wooden frame) that fits the underside and the sides of the neck of an ox or bullock. A bow pin holds it in place. It is used when the load is a plough or any other dragged, non-motorised, field agricultural machinery.
01Developed form
Its upper ends pass through a purpose-drilled hole through the bar of the yoke that is held in place into the yoke with a metal screw or key, called a bow pin. Where wood is used it is most often hardwood steamed into shape, especially elm, hickory or willow. A ring, enabling left/right movement controlled from the centre, is attached by a plate to the centre underside of a wooden yoke to enable a pair of bullocks/oxen to be chained to any other pairs in a team and to be hitched to the load behind the animal team.
02Alternative
Wooden staves can be used instead with a yoke, which is then termed a withers yoke, named after animals with high backs (withers) (e.g. zebu cattle) which pull mostly on the yoke part of the equipment, not as greatly on the bow shape borne by the stronger front quarters of oxen and bullocks.
Sources and credits
This article is adapted from the Wikipedia article “Oxbow”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.
Images, from Wikimedia Commons:
- Abraham Lincoln, the boy and the man (1908) (14770709635).jpg by Internet Archive Book Images, No restrictions
- Dietenheim - Futterhaus - Ochsenjoch.jpg by Wolfgang Sauber, CC BY-SA 3.0
- Bailgada Sharyat karjat.jpg by Manoj janwekar, CC BY-SA 4.0
Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.
