Network partition
Division of a computer network into subnets
A network partition is a division of a computer network into relatively independent subnets, either by design, to optimize them separately, or due to the failure of network devices. Distributed software must be designed to be partition-tolerant, that is, even after the network is partitioned, it still works correctly.
For example, in a network with multiple subnets where nodes A and B are located in one subnet and nodes C and D are in another, a partition occurs if the network switch device between the two subnets fails. In that case nodes A and B can no longer communicate with nodes C and D, but all nodes A-D work the same as before.
01As a CAP trade-off
The CAP theorem is based on three trade-offs: consistency, availability, and partition tolerance. Partition tolerance, in this context, means the ability of a data processing system to continue processing data even if a network partition causes communication errors between subsystems.
Sources and credits
This article is adapted from the Wikipedia article “Network partition”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.
Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.