NS Class 1000
Class of Dutch electric locomotives
The Nederlandse Spoorwegen (NS) Class 1000 was a set of ten electric locomotives (numbered 1001-1010) used in the Netherlands during the latter half of the 20th century. The electrical systems and three completed units were ordered from the Swiss Locomotive and Machine Works in 1942, but the war blocked delivery until 1948. Despite high failure rates the locomotives remained in service until 1982, and locomotive 1010, built by Werkspoor, is now preserved in the Dutch National Railway Museum.
01Background
In 1908 the first electric train in the Netherlands ran from Rotterdam to The Hague (Den Haag) and Scheveningen. It was electrified with a 10,000 volt 25 Hz AC power supply.
After World War I the Dutch government decided to install a committee to investigate electrification of the Dutch State Railways, Nederlandse Spoorwegen, formed in 1917 but officially only established in 1937. For that, the committee members traveled the world to visit existing electrified railways. In the early 1920s they came to the conclusion that a 1500 volt DC system would be the best choice.
Most Dutch electrified rolling stock were EMU's. During World War II, the German occupiers used these EMU sets to haul heavy freight trains for their war effort.
02History
NS management already had contact with the Swiss company Oerlikon about ordering a series of electric locos before the war. They were to be based on the Swiss Ae 4/6 type. In 1942 the series was ordered, but the war prevented delivery until 1948. The order was subsequently changed to suit Dutch needs.
The "Schweizerische Lokomotivenfabrik Winterthur" (SLM) would build 3 complete locos and deliver the electrical equipment for the remaining 7. These 7 would be built in the Netherlands, by Werkspoor.
The series would be numbered 1001-1010 and had 6 axles in a 2-2+2+2+2-2 or (1A)Bo(A1) configuration. The arrangement was similar to the widely used 1′Do1′ arrangement of this period, but with the outer driven axles articulated as a bogie with the unpowered carrying axles, rather than the carrying axles being articulated as single axle pony or Bissel trucks. This configuration was already used successfully on the electrified railway network on Java, then a Dutch colony, but in the Netherlands it was a failure due to its complicated technology and high maintenance.
Sources and credits
This article is adapted from the Wikipedia article “NS Class 1000”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.
Images, from Wikimedia Commons:
- Spoorwegmuseum loc NS 1010.jpg by Eriksw, CC BY-SA 4.0
- In Nederland gebouwde electrische locomotief op het CS, Bestanddeelnr 903-1161.jpg by Daan Noske / Anefo, CC0
- NS Class 1000 Nederlands Spoorwegmuseum.jpg by Maurits90, CC0
Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.