Model V
Early electromechanical general purpose computer
The Model V was among the early electromechanical general purpose computers, designed by George Stibitz and built by Bell Telephone Laboratories and became operational in 1946.
Only two machines were built: first one was installed at National Advisory Committee for Aeronautics (NACA, later NASA), the second (1947) at the US Army’s Ballistic Research Laboratory (BRL).
01Construction
Design was started in 1944. The tape-controlled (Harvard architecture) machine had two (design allowed for a total of six) processors ("computers") that could operate independently, an early form of multiprocessing.
The Model V weighed about 10 short tons (9.1 t).
02Significance
- Inspired Richard Hamming to investigate the automatic error-correction, which led to invention of Hamming codes
- One of the early electromechanical general purpose computers
- First American machine and first George Stibitz design to use floating-point arithmetic
- Had an early form of multiprocessing
- Had a very primitive form of an operating system, albeit in hardware. A separate hardware control unit existed to direct the sequence of computer operations.
03Model VI
Built and used internally by Bell Telephone Laboratories, operational in 1949.
Simplified version of the Model V (only one processor, about half the relays) but with several improvements, including one of the earliest use of the microcode.
Sources and credits
This article is adapted from the Wikipedia article “Model V”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.
Images, from Wikimedia Commons:
- Bell Relay Computer.png by U.S. Army Photo, Public domain
Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.