Hotend
Fused-filament 3D printer component
A hotend is a component of fused filament deposition 3D printers. Its purpose is to heat up and melt filament material for depositing into the intended shape.
The hotend is usually made of a bulk heat-conductive material with an internal resistive heater, coupled with a thermistor or thermocouple for precise temperature control. In common desktop 3D printer designs, the heater is located near the nozzle, and a heatsink is attached upstream (on the colder side). A heatbreak component made of dissimilar metals (bimetal) can be used to limit heat transfer to the cold filament above, increasing the controllability of the melted filament.
01Nozzle
The nozzle is an interchangeable tip attached to the hotend with a small diameter hole through which the melted filament is extruded. In desktop fused filament deposition printers, nozzles with different sized holes can be used to balance between printing speed and precision. Common large sized ones (1.0mm) extrude more material per travel length whereas smaller sized nozzles (0.2mm) result in higher quality.
In consumer desktop printers, the nozzle is often made of brass or stainless steel. Desired characteristics include abrasion resistance, as the nozzle frequently slides across the printed object, and thermal conductivity. To improve thermal conductivity, nozzles can be perforated with multiple holes near the intake, forming an internal structure with more contact area between the heated nozzle body and the filament. This results in a higher maximum volumetric flow, which can improve printing speed.
Sources and credits
This article is adapted from the Wikipedia article “Hotend”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.
Images, from Wikimedia Commons:
- Extruder lemio-en.svg by Д.Ильин: vectorization, CC0
Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.
