Device independent file format

The DVI format was designed to be compact and easily machine-readable. Toward this end, a DVI file is a sequence of commands which form "a machine-like language", in Knuth's words. Each command begins with an eight-bit opcode, followed by zero or more bytes of parameters. For example, an opcode from the group 0x00 through 0x7F (decimal 127), set_char_i, typesets a single character and moves the implicit cursor right by that character's width. In contrast, opcode 0xF7 (decimal 247), pre (the preamble, which must be the first opcode in the DVI file), takes at least fourteen bytes of parameters, plus an optional comment of up to 255 bytes.

In a broader sense, a DVI file consists of a preamble, one or more pages, and a postamble. Six state variables , , , , , and are maintained as signed 32-bit integers, where and are the current horizontal and vertical offsets from the upper-left corner (increasing moves down the page), and hold horizontal space values, and and hold vertical space values.

These variables can be pushed to or popped from the stack. In addition, the current font f is held as an integer value, but is not pushed and popped with the rest of the state variables when the opcodes push or pop are encountered. Font spacing information is loaded from TFM files. The fonts themselves are not embedded in the DVI file, only referenced by an integer value defined in the relevant fnt_defi op. (This is done exactly twice for each loaded font: once before it is referenced, and once in the postamble.) f contains an integer value of up to four bytes in length, though in practice, TeX only ever outputs font numbers in the range 0 through 255.

Similarly, the DVI format supports character codes up to four bytes in length, even though only the 0-255 range is commonly seen, as the TFM format is limited to that range. Character codes in DVI files refer to the character encoding of the current font rather than that of the system processing it. This means, for instance, that an EBCDIC-based system can process a DVI file that was generated by an ASCII-based system, so long as it has the same fonts installed.

The DVI format does not have support for graphics except for the most basic black-and-white boxes. Instead DVI has a general escape/extension mechanism, known as specials (expressed by the \special command in TeX), which defers graphics (and color) to post-processing filters. There are numerous DVI specials, the most notable of which are PostScript specials, but other programs like tpic have their own.

DVI files are often converted into PDF, PostScript, or PCL format for reading and printing. They can be also viewed directly by using DVI viewers.

• DVI viewers: YAP (included in MiKTeX), xdvi, windvi, Evince, KDVI, Okular, dviout, dviwin, DView (included in the commercial BaKoMa TeX distribution), javaDVI, MDVI, and DVIWindo (of the now defunct commercial Y&Y TeX, which has been open-sourced).
• DVI to human-readable format: dvitype (disassembler of sorts)
• DVI-to-PDF converters: dvipdf, dvipdfm, dvipdfmx
• DVI-to-PS converters: dvips is the de facto standard. CTAN includes some older ones like dvitops (and DVIPSONE) with a note that they lost their market share a long time ago.
• DVI-to-bitmap converters: dvipng (generates GIF or PNG), or use dvips and Ghostscript
• DVI-to-SVG converters: dvisvg, dvisvgm, dvi2svg; As of 2014 the only one included in CTAN and actively maintained is dvisvgm.

The first DVI previewers capable of on-screen previewing and modification of LaTeX documents ran on Amigas.

DVI-to-PDF converters

dvipdf is a tool to translate DVI files (generated by TeX) to PDF files. In current Linux distributions like Ubuntu, it is a thin wrapper around dvips and Ghostscript, and copyrighted by Artifex Software (the makers of Ghostscript). A possibly different program with the same name, described as a modified version of dvips, was announced in the late 1990s by Sergey Lesenko, however it was apparently never released.

dvipdfm is a DVI-to-PDF translator developed by Mark A. Wicks. The early documentation of dvipdfm specifically mentions the limited availability of Lesenko's dvipdf as a reason for creating dvipdfm. dvipdfm supports most of the newer special functions of the PDF format, including bookmarks, annotations, thumbnails, and dvips specials, a feature making possible the inclusion of Encapsulated PostScript (.eps) files like METAPOST output, as well inclusion of JPEG and PNG images; other features of dvipdfm include partial font embedding (reducing file size) and balancing the internal PDF document trees to speed up rendering of large documents. Many of these features (except for the direct support for .eps files) are also present in pdfTeX, which typesets TeX directly to PDF. The 2004, 4th edition of the Guide to LaTeX compares them in the following way:

The dvipdfm program is in the original spirit of TEX, that uses DVI as a universal intermediate format for all outputs. Purists might tend to respect this ideal. After all, no one ever considered rewriting TEX to produce PostScript output directly. That said, one must consider that TEX was invented in the days when no one printer specification dominated the field. Today, PDF is much more than a printer format; it is the means of representing documents electronically. That alone would not justify preferring pdfTEX over a DVI-to-PDF converter, nor would the fact that it saves a processing step; the deciding argument is that pdfTEX has established itself as reliable, robust, and flexible. In the end, it is likely a question of which program one is more comfortable with, and which one has given the better results for the particular user.

dvipdfmx is an extended version of the dvipdfm DVI-to-PDF translator, included in current TeX distributions like TeX Live 2014 and MiKTeX 2.9. The primary goal of the dvipdfmx project is to support multi-byte character encodings and CJK character sets for East Asian languages. dvipdfmx is also included (in a somewhat modified form) in XeTeX.

The 2nd, 2008 edition of the LaTeX Graphics Companion makes the following workflow suggestion:

The route that you should follow depends mostly on the graphics material that you want to include. If most of it is in EPS format, the easiest way is to use latex, followed by dvips and finally ps2pdf. If all of your graphics files are already in PDF format, with some JPEG and PNG images, the more direct route is to run pdflatex. You can also combine both approaches by running latex and the dvipdfmx program. If you make a lot of use of PSTricks, you should look at [...] the pst-pdf package.