Don Bridge
Bridge in Sprotbrough, South Yorkshire
The Don Bridge is a motorway viaduct in South Yorkshire, England.
01History
The line of the fifteen-mile Doncaster By-Pass Motorway was fixed in the spring of 1957.
Design
Each carriageway is carried on a separate structure. Each carriageway is supported by five riveted steel girders. There are 2,225 tons of structural steelwork.
Construction
Construction of the Doncaster bypass started on 22 June 1959. There were 28 bridges in the contract for the Doncaster bypass, including five railway bridges.
The fabrication of the steelwork for the bridge took place at the West Bromwich Works. The steel superstructure for the bridge was launched from one end of the bridge on an embankment. The steel fabrication was sprayed with zinc. The concrete and steel design is known as composite construction.
The concrete beams were made by Ferro Concrete and Stone Co. (North Notts) Ltd of Retford.
The bypass was built by a consortium including Holland, Hannen & Cubitts, on a £6 million contract.
02Structure
The south side of the bridge is in Warmsworth, and the north side is in Sprotbrough and Cusworth. The bridge crosses the Trans Pennine Trail (National Cycle Route 62), which follows the river. It is situated around one mile north of junction 36.
Sources and credits
This article is adapted from the Wikipedia article “Don Bridge”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.
Images, from Wikimedia Commons:
- Doncaster bypass crossing the River Don. - geograph.org.uk - 536070.jpg by Steve F, CC BY-SA 2.0
- A1 Bridge over R Don - panoramio.jpg by PJMarriott, CC BY 3.0
Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.