Control and Provisioning of Wireless Access Points protocol
Networking protocol
The Control And Provisioning of Wireless Access Points (CAPWAP) protocol is a standard, interoperable networking protocol that enables a central wireless LAN controller to manage a collection of Wireless Termination Points (WTPs), more commonly known as wireless access points. The protocol specification is described in RFC 5415.
01Protocol overview
CAPWAP is based on Lightweight Access Point Protocol (LWAPP). The state machine of CAPWAP is similar to LWAPP's, but with the addition of a full Datagram Transport Layer Security (DTLS) tunnel establishment. The standard provides configuration management and device management, allowing for configurations and firmware to be pushed to access points (APs). Because the overall state design of the CAPWAP protocol is largely the same as the finite-state machine (FSM) in LWAPP, a detailed diagram is not needed.
The protocol uses a generic encapsulation and transport mechanism, making it independent of a specific radio technology. The specification of CAPWAP for a particular wireless technology is called a binding. An IEEE 802.11 binding is provided in RFC 5416.
CAPWAP uses UDP ports 5246 (control channel) and 5247 (data channel).
Sources and credits
This article is adapted from the Wikipedia article “Control and Provisioning of Wireless Access Points protocol”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.
Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.
