Address plus Port
The Address plus Port (A+P) within the network layer communications protocol for Internet networking is an experimental approach to the IPv4 address shortage. It is a technique for sharing single IPv4 addresses among several users without using stateful network address translation in the carrier network.
Normal routing uses the IPv4 address only to identify which host an Internet Protocol packet is destined for. A+P uses the destination Transmission Control Protocol or User Datagram Protocol port in addition to the Internet Protocol address to extend the range of available host addresses. Each host is assigned a unique range of ports which they set as the source port in outbound packets and which they use to receive inbound traffic.
A+P is a stateless alternative to conventional stateful network address translation as the A+P gateway does not need to keep track of every Transmission Control Protocol or User Datagram Protocol flow. However, it does require A+P aware software at the end-point, capable of limiting the range of port numbers used for originating connections to its allocated range, either in the end host, or, in the more common likely scenario, in the customer premises equipment own local NAT44 implementation.
Sources and credits
This article is adapted from the Wikipedia article “Address plus Port”, written by its contributors and licensed under CC BY-SA 4.0. Fathomly has changed the layout, removed citation markers, navigation and maintenance notices, and adjusted punctuation. This adapted version is shared under the same license. For references, see the original article.
Images, from Wikimedia Commons:
- A+P.svg by Applications-internet.svg: Tango! Desktop Project Cartoon_Cloud1.svg: egyninja Osa_device-wireless-router.svg: OSA Osa_hub.svg: OSA derivative work: Cybjit (talk), CC BY-SA 3.0
Fathomly is not affiliated with or endorsed by the Wikimedia Foundation. Spotted a problem? Tell us.